MAZAK FJV 60 120 milling machining centers vertical

MAZAK FJV 60 120 milling machining centers vertical

x-travel 3200 mm
y-travel 1400 mm
z-travel 585 mm
Control PC-Fusion-640M
spindle taper CAT 50
column daylight 1500 mm
spindle turning speed range 22 – 10.000 U/min
max. torque on the spindle max. 529 Nm
feeds x/y/z -stepless 1 – 18000 mm/min
rapid traverse X-axis 20 m/min
rapid traverse Y-axis 32 m/min
rapid traverse Z-axis 18 m/min
table width 1250 mm
table length 3000 mm
table load 5000 Kg
table height over floor 850 mm
T-slots 9
T-slot – width 22 mm
T-slot – distance 140 mm
tool change unit 40
workpiece length – max. 3000 mm
workpiece width – max. 1480 mm
workpiece height max. 640 mm
tool changing time 9,8 sec
wotkpiece diameter with 2 vacant positions 210 mm
workpiece diameter at full load 125 mm
max. tool weight 20 kg
tool length – max. 380 mm
air pressure – required 5 bar
Air volume 200 l/min
electrics – voltage/frequency 400 / 50 V/Hz
coolant tank 450 l
distance spindle centre table top edge 200 – 708 mm
connected load 59 kVA
voltage 400 V
frequency 50 Hz
B0z8mws7a0
require installation area 30,1 qm
total power requirement ca. 32 kW
weight of the machine ca. 27 t
dimensions of the machine ca. 8,4 x 4,9 x 3,9 m

including the following accessories:
– Column elevation by 250 mm
– tool magazine for 40 tools (chain magazine version)
– additional working area cover fully encapsulated version
– factory preparation for cooling by the spindle (max.70 bar, Mayfran)
– Mazak Monitoring System B incl. measuring probe (MP12) and function under
MAZATROL: zero point adjustment
– MAYFRAN CONSEP 2000 chip conveyor rear right ejection incl. high pressure pump
– Removable handwheel
– Torque-dependent drilling cycle (Mazatrol)Automatic determination of the
drilling depth increments after torque detection. (Preferably together with
HSS
tool)
– Circular reaming cycle Spiral reaming of fits
– Interface set
Contents:
– Interface for keyboard
– Interface for mouse
– Interface for printer
– MAZAK Monitoring System C (AFC, TBR, TLM):
Adaptive Feed Control (AFC)
Tool breakage monitoring (TBR)
Tool life monitoring and replacement tool call (TLM)
– Navigation monitoring display
– Machining navigation
– PCMCIA interface
– Spindle cooling unit
– Tool length measuring device
– Blow out unit
– Compl. coolant unit
– Coolant and chip protection
– Work area lighting
– Removable handwheel for three axes
– 1 set of manuals

– CNC option package Performance
Contents of the package:
– Common variables (600 pairs)
– MAZAK Tapping Tornado (EIA/ISO)
– Synchronous tapping
– EIA/ISO input function
– EIA/ISO special function
Spiral interpolation (G02.1, G03,1),
Correction of the 3D tool (G40-G42)
Scaling (G50, G51) a.o.
– EIA/ISO, constant feed (G93)
When using this function, the feed rate remains constant for
combinations of straight lines and curves on the contour.
– EIA/ISO tool length measurement (G37)
– EIA/ISO, program unit stop function
Program run is automatically stopped at the
program unit is automatically stopped.
– MAZACC-2D (Mazatrol & EIA/ISO)
Precision control function, for precise vector interpolation and optimum
acceleration and deceleration at edges and radii. This enables
improved two-dimensional shape accuracy.
– Additional workpiece coordinate system (G54.1 P1 – 48) 48 pairs
– Spiral machining function (G33) for boring head machining (e.g. with
d’Andrea tool)

– all dimensions, weights and performance information are non-binding –

– Used machine without warranty –

– Subject to prior sale –

Bu gönderiyi paylaş