HMS 450 x 6 Strip processing line decoiler and straightener

Strip processing line, decoiler and straightener
Year of manufacture 1991
strip width 50 to 450 mm
Sheet thickness with inactive straightener 6 mm
sheet thickness with active straightener 2 mm
– very good equipment and feeding aids
space requirement of the whole line L x W approx. 7000 x 3000 mm
weight of the whole line approx. 11 ton.
good condition

Straightening machine HMS type RS 47-04/1, Masch. No. 00-0617/02
belt width, nominal width 400 mm
strip width, maximum passage width max. 455 mm
Strip thickness at 400 mm width max. 1,5 mm (for steel)
Strip thickness at 400 mm width max. 2 mm (for copper)
Cehcnexej7
Speed max. 40 m/min.
Number of straightening rolls 7 pieces
Diameter of straightening rolls Ø 40 mm
Number of draw rolls 2 pieces
Pull roll diameter Ø 80 mm
infeed height, passage height 1500 mm
– Straightening rolls hardened, ground and hard-chrome plated, with central support
– tension rolls hardened, ground and hard-chrome plated, with hydraulic ventilation
– manual straightening roll infeed
– insertion aid with hydraulically extendable tongue and hydraulically adjustable deflection roller
– lateral strip guide adjustable
– All straightening rolls driven via transfer gearbox with cardan shafts
– Both draw rolls driven via gearbox with cardan shafts
– Frequency controlled drive via gear motors
– Straightener opening stroke 250 mm for cleaning of the line or for driving with thicker material, stroke movement via trapetz thread spindle
– Ultrasonic loop control
transport dimensions L x W x H 3600 x 2200 x 2200 mm
Own weight approx. 4 ton

decoiler HMS type BA 1.5-06/80, Masch. No. 00-0617/01
coil weight max. 8000 kg
Coil outside diameter max. 1600 mm (with loading chair)
Coil outside diameter max. 2000 mm (without loading chair)
Coil start diameter Ø 1700 mm
Coil inside diameter, spread range 460-520 mm
Coil width, nominal width max. 630 mm
Width of spreading jaws 750 mm
Height of reel crown above base plate 1500 mm
– drive of the reel crown via hydraulic motor and gear wheel
– pneumatic overrun brake on the TWINFLEX reel crown
– Hydraulic spreading of the reel crown, centrally via wedge slide system
– Hydraulic pressure arm with hydraulically driven double pendulum roller
– Coil loading chair with 12 ton. Lifting force and 300 mm stroke
– Decoiler in overhead conveyor with motorized transverse drive
transport dimensions L x W x H 3500 x 1900 x 2500 mm
Dead weight approx. 5 ton

Central hydraulic power unit adjacent
Tank capacity 350 liters
drive power 18,5 kW
– Drive motor with 2 pumps REXROTH (tandem pump)
– Oil cooler as air heat exchanger with fan motor
transport dimensions L x W x H 1600 x 850 x 1450 mm
Own weight approx. 800 kg

electrical cabinet adjacent
– all cable connections plugged via Harting plugs
transport dimensions L x W x H 2800 x 500 x 2250 mm
dead weight approx. 800 kg
The listing was translated automatically. Translation errors are possible.